| Grinding wheels (Ø x thickness x bore) | 200 x 25 x 32 mm / 8 x 1 x 1 1/4 “ |
| No-load speed | 2980 /min |
| Rated input power | 600 W |
| Output power | 420 W |
| Breakdown torque | 2.6 Nm / 23 in-lbs |
| Extraction nozzle, inner Ø: | 35 mm / 1 3/8 “ |
| Weight | 16.6 kg / 36.6 lbs |
| Cable length | 2 m / 7 ft |
| Power Input | 1,340W |
| Full Load Impact Rate | 1,400/min |
| Bit Shank | 30mm Hex.(1-3/16″) |
| Overall Length | 731mm (28-3/4”) |
| Weight | 18.0kg (39.7lbs.) |
| Standard Accessories | Bull Point, Carrying Case Carrying Case with Casters |
| Power Input | 1,500W |
| Full Load Impact Rate | 1,500-2,100/min |
| Bit Shank | SDS max |
| Overall Length | 585mm (23-1/32”) |
| Weight | 11.6kg (25.6lbs.) |
| Vibration Total Values (triax vector sum)*2 |
Vibration emission value ah, CHeq = 15.0m/s2.) |
| Equivalent Chiseling Value |
Uncertainty K = 1.5m/s2 |
| Standard Accessories | Bull Point, Side Handle, Carrying Case |
| Power Input | 1,240 watt |
| Full Load Impact Rate | 1,400/min |
| Bit Shank | SDS max |
| Weight | 15 Kg |
| Power Input | 1,250W |
| Full Load Impact Rate | 1,600/min. |
| Bit Shank | SDS max |
| Overall Length | 570mm (22-7/16″) |
| Weight | 10.2kg (22.5lbs.) |
| Standard Accessories | Side Handle, Carrying Case, Bull Point (For Europe only) |
| Max. single blow energy (EPTA) | 20 J |
| Maximum impact rate | 950 /min |
| Rated input power | 1600 W |
| Bit retainer | SDS-max |
| Weight (without power cable) | 11 kg / 24.3 lbs |
| Cable length | 6 m / 20 ft |
| Chiseling | 11 m/s² |
| Uncertainty of measurement K | 2 m/s² |
| Sound pressure level | 91 dB(A) |
| Sound power level (LwA) | 102 dB(A) |
| Max. single blow energy (EPTA) | 8.6 J |
| Maximum impact rate | 3000 /min |
| Rated input power | 1300 W |
| Bit retainer | SDS-max |
| Weight (without power cable) | 6.6 kg / 14.6 lbs |
| Cable length | 4 m / 13 ft |
| Chiseling | 12.7 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 84 dB(A) |
| Sound power level (LwA) | 98 dB(A) |
| Uncertainty of measurement K | 1.9 dB(A) |
| Power Input | 850 Watt |
| Drill diameter in concrete | 4-30 mm |
| Drill diameter in steel &wood | 13 & 32 mm |
| Maximum impact rate | 0 – 3,700 /min. |
| No-load speed | 0-850 rpm |
| Tool holder | SDS-Plus |
| Weight | 4.3 Kg. |
| Power input | 850 watt |
| Drill diameter in concrete | 4 – 28 mm |
| Drill diameter in steel & wood | 13 & 30 mm |
| No-load speed | 0 – 1,100 rpm |
| Maximum impact rate | 4,300 /min. |
| Max. single impact energy | 3.4 joule |
| Tool holder | SDS-Plus |
| Weight | 2.9 Kg. |
| Power input | 830 watt |
| Drill diameter in concrete | 4 – 26 mm |
| Drill diameter in steel & wood | 13 & 30 mm |
| Maximum impact rate | 4,300 /min. |
| No-load speed | 0 – 1,100 rpm |
| Max. single impact energy | 3.2 joule |
| Tool holder | SDS-Plus |
| Weight | 2.8 Kg. |
| Power input | 730 watt |
| Drill diameter in concrete | 4 – 24 mm |
| Drill diameter in steel & wood | 13 & 30 mm |
| Maximum impact rate | 3,950 /min. |
| No-load speed | 0 – 1,050 rpm |
| Max. single impact energy | 2.7 joule |
| Tool holder | SDS-Plus |
| Weight | 2.7 Kg. |
| Power input | 715 watt |
| Grinding disc diameter | 100 mm |
| Grinding spindle thread | M 10 |
| No-load speed | 12,000 rpm |
| Weight | 1.5 Kg. |
| Power input | 550 watt |
| Chuck capacity | 1.5 – 13 mm |
| Drill diameter in concrete | 13 mm |
| Drill diameter in steel | 13 mm |
| Drill diameter in wood | 20 mm |
| Maximum impact rate | 29,000 /min. |
| No-load speed | 0 – 2,900 rpm |
| Weight | 1.4 Kg. |
| Aperture | 65 mm |
| Twist drill bit diameter | 32 mm |
| Magnet retention force | 18 kN |
| Depth of feed | 260 mm |
| Maximum height | 650 mm |
| Dimensions magnet base | 110×2,208 mm |
| Weight | 22 Kg |
| Power input | 600 watt |
| Grinding disc diameter | 100 mm (4”) |
| Grinding spindle thread | M 10 |
| No-load speed | 11,500 rpm |
| Weight | 1.7 Kg. |
| Aperture | 65 mm |
| Twist drill bit diameter | 32 mm |
| Magnet retention force | 18 kN |
| Depth of feed | 260 mm |
| Maximum height | 650 mm |
| Dimensions magnet base | 110×2,208 mm |
| Weight | 22 Kg |
| Aperture | 65 mm |
| Twist drill bit diameter | 32 mm |
| Magnet retention force | 18 kN |
| Depth of feed | 260 mm |
| Maximum height | 650 mm |
| Dimensions magnet base | 110×2,208 mm |
| Weight | 22 Kg |
| Power input | 2,600 watt |
| Grinding/polishing disc diameter | 180 mm (7″) |
| Grinding spindle thread | M 14 |
| No-load speed | 8,500 rpm |
| Weight | 5.1 Kg. |
| Power Input | 800 Watt |
| Drill diameter in concrete | 4-32 mm |
| Drill diameter in steel &wood | 13 & 32 mm |
| Maximum impact rate | 4,470 /min. |
| No-load speed | 0-1,150 rpm |
| Max. single impact energy | 3.1 Joule |
| Tool holder | SDS-plus |
| Weight | 3.4 Kg. |
| Power input | 2,400 watt |
| Grinding/polishing disc diameter | 180 mm (7”) |
| Grinding spindle thread | M 14 |
| No-load speed | 8,500 rpm |
| Weight | 5.4 Kg. |
| Power Input | 880 Watt |
| Drill diameter in concrete | 4-28 mm |
| Drill diameter in steel &wood | 13 & 32 mm |
| Maximum impact rate | 4,400 /min. |
| No-load speed | 0-1,150 rpm |
| Max. single impact energy | 3.2 Joule |
| Tool holder | SDS-plus |
| Weight | 3.1 Kg. |
| Power input | 2,200 watt |
| Grinding/polishing disc diameter | 180 mm (7″) |
| Grinding spindle thread | M 14 |
| No-load speed | 8,500 rpm |
| Weight | 4.9 Kg. |
| Power Input | 850 Watt |
| Drill diameter in concrete | 4-28 mm |
| Drill diameter in steel &wood | 13 & 32 mm |
| Maximum impact rate | 4,300 /min. |
| No-load speed | 0-1,100 rpm |
| Max. single impact energy | 3.0 Joule |
| Tool holder | SDS-plus |
| Weight | 3.1 Kg. |
| Power Input | 800 Watt |
| Drill diameter in concrete | 4-26 mm |
| Drill diameter in steel &wood | 13 & 30 mm |
| Maximum impact rate | 5,400 /min |
| No-load speed | 0-1,150 rpm |
| Max. single impact energy | 2.3 Joule |
| Tool holder | SDS-plus |
| Weight | 2.9 Kg. |
| Air output max. |
3660 / 130 cfm
|
| Vacuum |
248 hPa (mbar) / 3.6 psi psi
|
| Filter surface |
8600 cm² / 1333 sq.inch
|
| Input power max. |
1400 W
|
| Container volume |
50 l / 13 gal
|
| Suction hose Ø |
35 mm / 1 3/8 “
|
| Hose length | 3.2 m / 10 ft |
| Weight |
16 kg / 35.3 lbs
|
| Cable length |
8 m / 26 ft m
|
| Power Input | 1,250 Watt |
| Grinding disc diameter | 125 mm (5”) |
| Grinding spindle thread | M 14 |
| No-load speed | 11,000 rpm |
| Weight | 2.4 Kg. |
| Power Input | 800 Watt |
| Drill diameter in concrete | 4-24 mm |
| Drill diameter in steel &wood | 13 & 30 mm |
| Maximum impact rate | 5,400 /min |
| No-load speed | 0-1,230 rpm |
| Max. single impact energy | 2.3 Joule |
| Tool holder | SDS-Plus |
| Weight | 2.4 Kg. |
| Air output max. | 3600 / 127 cfm |
| Vacuum | 200 hPa (mbar) / 2.9 psi psi |
| Filter surface | 3600 cm² / 558 sq.inch |
| Input power max. | 1200 W |
| Container volume | 32 l / 8 gal |
| Suction hose Ø | 35 mm / 1 3/8 “ |
| Hose length | 3.2 m / 10 ft |
| Weight | 7 kg / 15.4 lbs |
| Cable length | 5 m / 16 ft |
| Power Input | 900 Watt |
| Grinding disc diameter | 100 mm (4”) |
| Grinding spindle thread | M 10 |
| No-load speed | 10,500 rpm |
| Weight | 2.0 Kg. |
| Power Input | 1,010 Watt |
| Drill diameter in concrete | 12-40 mm |
| Maximum impact rate | 3,200 /min. |
| No-load speed | 200-350 rpm |
| Max. single impact energy | 7.5 Joule |
| Tool holder | SDS-plus |
| Weight | 6.2 Kg. |
| Air output max. | 3600 / 127 cfm |
| Vacuum | 200 hPa (mbar) / 2.9 psi psi |
| Filter surface | 3600 cm² / 558 sq.inch |
| Input power max. | 1200 W |
| Container volume | 20 l / 5 gal |
| Suction hose Ø | 35 mm / 1 3/8 “ |
| Hose length | 1.75 m / 6 ft |
| Weight | 5 kg / 11 lbs |
| Cable length | 5 m / 16 ft |
| Power Input | 850 Watt |
| Grinding disc diameter | 100 mm (4”) |
| Grinding spindle thread | M 10 |
| No-load speed | 10,500 rpm |
| Weight | 1.6 Kg. |
| Volt/frequency (V/Hz) | 220-240/50-60 |
| Max. power (W) | 800 |
| Rated power (W) | 700 |
| Sound power level dB(A) IEC/EN 60704-2-1 | 74±2 |
| Sound pressure level dB(A) BS 5415 | 57±2 |
| Energy efficiency class | A |
| Cleaning performance on carpet | C |
| Cleaning performance on hard floor | A |
| Dust re-emission | C |
| Annual energy consumption (kWh/year) | 27,8 |
| Insulation class | II |
| Type of insulation | IPXO |
| Dust bag filling (l) | 2,1 |
| Width (mm) | 360 |
| Depth (mm) | 280 |
| Height (mm) | 280 |
| Weight, cleaner only (kg) | 4.6 kg |
| Dust Filter | EPA 10 |
| Power Input | 720 Watt |
| Grinding disc diameter | 100 mm (4”) |
| Grinding spindle thread | M 10 |
| No-load speed | 11,000 rpm |
| Weight | 1.6 Kg. |
| Power input | 2,600 watt |
| Grinding disc diameter | 230 mm (9”) |
| Grinding spindle thread | M 14 |
| No-load speed | 6,600 rpm |
| Weight | 6.3 Kg. |
| Mains connection (V/~/Hz/A) | 220-240/ 1~/ 50/60 |
| Vacuum (mbar/kPa) | 200/20 |
| Power Pmax (W) | 1200 |
| Container volume (l-max) | 12 |
| Hose length (m) | 1.9 |
| Dimensions (L x W x H) (mm) | 360x330x440 |
| Weight (kg) | 4.4 |
| Vacuum tube diameter (mm) | 36 |
| Plug for electric tools (W) | No |
| Max. suction power (W) | 250 |
| Power Piec (W) | 1000 |
| Sound level lpa/lwa (dB(A)) | 87/74 |
| Power Input | 650 Watt |
| Chuck Capacity | 1.5-13 mm |
| Drill Diameter in Steel | 13 mm |
| Drill Diameter in Wood | 30 mm |
| No Load Speed | 0-2,800 rpm |
| Weight | 1.8 kg |
| Length x width x height (mm) | 840x620x1000 |
| Cable length (m)/ plug type | 10/EU |
| Volt/frequency (V/Hz) | 220-240/50-60 |
| IP protection class | IP24 |
| Rated power (W) | 2500 |
| Power Piec (W) | 2400 |
| Suction power end of tube (W) | 200 |
| Airflow (l/sec.) | 72 |
| Vacuum at nozzle (kPa) | 21 |
| Sound pressure level (dB(A) BS 5415) | 66 |
| Sound power level (dB(A) IEC 704) | 84 |
| Tank capacity (l) | 55 |
| Dust bag capacity (l) | 28 |
| Wet filter area (cm²) | 1840 |
| Cartridge filter area (cm²) | 4410 |
| Hose length (m) | 2.5 |
| Inlet (mm) | 40 |
| Weight (kg) | 25.5 |
| Dual power | √ |
| Tube holder | √ |
| Dual filter system | √ |
| Storage of accessories | √ |
| Drain hose | √ |
| Power Input | 450 Watt |
| Chuck Capacity | 1-10 mm |
| Drill Diameter in Steel | 10 mm |
| Drill Diameter in Wood | 20 mm |
| No Load Speed | 0-2,400 rpm |
| Weight | 1.3 kg |
| Power input | 2,600 watt |
| Grinding disc diameter | 180 mm (7”) |
| Grinding spindle thread | M 14 |
| No-load speed | 8,500 rpm |
| Weight | 6.2 Kg. |
| Power input | 780 watt |
| Chuck capacity | 1.5 – 13 mm |
| Drill diameter in masonry | 20 mm |
| Drill diameter in steel | 13 / 8 mm |
| Drill diameter in wood | 40 / 25 mm |
| Maximum impact rate | 58,900 /min. |
| No-load speed | 0-1,100 / 3,100 rpm |
| Weight | 2.6 Kg. |
| Airflow rate (l/min.) | 2 x 3600 |
| Vacuum (mbar/kPa) | 250/25 |
| Power Pmax (W) | 2 x 1500 |
| Power Piec (W) | 2 x 1200 |
| Working sound level (dB(A)) | 67 |
| Container volume (l-max) | 70 |
| Mains connection (V/~/Hz/A) | 230/1/50-60/16 |
| Weight (kg) | 30 |
| El cable (m) | 10 |
| Main filter type | PET Nano |
| Filter cleaning system | Push&Clean |
| Length x width x height (mm) | 580x600x970 |
| Softstart | √ |
| Tilting container | √ |
| Anti-static system | √ |
| Robust steel chassis | √ |
| Storage of accessories | √ |
| Cable storage | √ |
| Fleece filter bag 1 pcs | √ |
| Power input | 2,000 watt |
| Temperature range | 450o / 600o C |
| Airflow rate | 250 / 500 /min. |
| Control, airflow | 2 step |
| Weight | 0.57 Kg. |
| Power input | 2,400 watt |
| Grinding disc diameter | 180 mm (7”) |
| Grinding spindle thread | M 14 |
| No-load speed | 8,500 rpm |
| Weight | 5.7 Kg. |
| Power input | 650 watt |
| Chuck capacity | 1.5 – 13 mm |
| Drill diameter in concrete | 14 mm |
| Drill diameter in steel | 13 mm |
| Drill diameter in wood | 30 mm |
| Maximum impact rate | 44,800 /min. |
| No-load speed | 0 – 2,800 rpm |
| Weight | 1.8 Kg. |
| Length x width x height (mm) | 450x380x750 |
| Airflow rate (l/min.) | 3700 |
| Vacuum (mbar/kPa) | 250/25 |
| Power Pmax (W) | 1500 |
| Power Piec (W) | 1200 |
| Working sound level (dB(A)) | 59 |
| Container volume (l-max) | 47 |
| Mains connection (V/~/Hz/A) | 230/1/50-60/16 |
| Weight (kg) | 11 |
| El cable (m) | 7.5 |
| Main filter type | PET |
| Filter cleaning system | Push&Clean |
| Softstart | √ |
| Anti-static system | √ |
| Storage of accessories | √ |
| Fleece filter bag 1 pcs | √ |
| Air volume | 240/450 l/min // 8 / 16 cfpm |
| Number of air volume levels | 2 |
| Air temperature | 300 / 500 °C // 570 / 930 °F |
| Number of air temperature levels | 2 |
| Rated input power | 1600 W |
| Weight (without power cable) | 0.6 kg / 1.3 lbs |
| Cable length | 2.2 m / 7 ft |
| Sound pressure level | 70 dB(A) |
| Power input | 2,200 watt |
| Grinding disc diameter | 180 mm (7”) |
| Grinding spindle thread | M 14 |
| No-load speed | 8,500 rpm |
| Weight | 5.7 Kg. |
| Laser class | 2 |
| Wavelength | 635 nm |
| Light output | < 1 mW |
| Measurement range | 0.05 – 60 m // 0.2 – 197 ft |
| Measuring accuracy | ± 1.5 mm / ± 1/16 “ |
| Number of measurements per battery charge | 5000 |
| Protection type IP | IP 40 |
| Weight (with batteries) | 0.11 kg / 0.24 lbs |
| Laser functions | Length / Area / Volume / Continuous measurement (tracking) / Pythagoras 1 / Pythagoras 2 / Minimum tracking / Maximum tracking |
| No-load speed | 10000 – 30500 /min |
| Rated input power | 710 W |
| Output power | 430 W |
| Revolutions at rated load | 24000 /min |
| Collar diameter | 43 mm / 1 11/16 “ |
| Collet chuck bore | 6 mm / 0.2362 “ |
| Weight (without power cable) | 1.6 kg / 3.5 lbs lbs |
| Cable length | 4 m / 13 ft |
| Surface grinding | 5.6 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 80 dB(A) |
| Sound power level (LwA) | 91 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| No-load speed | 13000 – 34000 /min |
| Rated input power | 710 W |
| Output power | 430 W |
| Revolutions at rated load | 24000 /min |
| Collar diameter | 43 mm / 1 11/16 “ |
| Collet chuck bore | 6 mm / 0.2362 “ |
| Weight (without power cable) | 1.4 kg / 3.1 lbs lbs |
| Cable length | 4 m / 13 ft |
| Surface grinding | 6.8 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 82 dB(A) |
| Sound power level (LwA) | 93 dB(A) |
| Uncertainty of measurement K | 3 dB(A) |
| Power input | 2,200 watt |
| Cutting disc diameter | 355 mm |
| Cutting disc bore | 25.4 mm |
| No-load speed | 3,800 rpm |
| Weight | 17 Kg. |
| Power input | 1,050 watt |
| Blade diameter | 190 mm |
| Cutting depth 90o | 68 mm |
| Cutting depth 45o | 46 mm |
| Bore | 30 mm |
| No-load speed | 5,500 rpm |
| Weight | 4.2 Kg. |
| Power input | 1,050 watt |
| Blade diameter | 190 mm |
| Cutting depth 90o | 68 mm |
| Cutting depth 45o | 46 mm |
| Bore | 30 mm |
| No-load speed | 5,500 rpm |
| Weight | 4.2 Kg. |
| Dimensions | 1650 x 650 x 1000 mm / 5.5 x 2.2 x 3.3 ft |
| Max. support surface | 800 x 550 mm / 31 1/2 x 21 5/8 ” mm |
| Working height | 850 mm / 33 1/2 “ |
| Cutting height | 0 – 85 mm // 0 – 3 5/16 “ |
| Maximum cutting height 90/45° | 85 / 60 mm // 3 5/16 / 2 3/8 “ |
| Maximum cutting width at parallel guide/rip fence | 290 mm / 11 3/8 “ |
| Maximum material width at mitre fence | 220 mm / 8 5/8 “ |
| No-load speed | 2980 /min |
| Cutting speed | 50 m/s / 164 ft/s |
| Saw blade | 315 x 30 mm / 12 3/8 x 1.181 “ |
| Saw blade swivel range | 0 – 45 ° |
| Rated input power | 2000 W |
| Output power | 1450 W |
| Weight | 62 kg / 137 lbs |
| Sound pressure level | 98 dB(A) |
| Sound power level (LwA) | 112 dB(A) |
| Uncertainty of measurement K | 4 dB(A) |
| Power input | 2,300 watt |
| Cutting disc diameter | 355 mm |
| Cutting disc bore | 25.4 mm |
| No-load speed | 4,000 rpm |
| Weight | 16.9 Kg. |
| Power input | 750 watt |
| Cutting depth in wood | 140 mm |
| Cutting depth in NF metal | 35 mm |
| Cutting depth in sheet steel | 10 mm |
| No-load stroke rate | 1,000 – 3,100 /min. |
| Length of stroke | 26 mm |
| Weight | 2.5 Kg. |
| Power input | 450 watt |
| Cutting depth in wood | 65 mm |
| Cutting depth in NF metal | 18 mm |
| Cutting depth in sheet steel | 6 mm |
| No-load stroke rate | 600 – 3,000 /min. |
| Length of stroke | 18 mm |
| Weight | 1.9 Kg. |
| Dimensions | 790 x 515 x 515 mm / 2.6 x 1.7 x 1.7 ft mm |
| Maximum cutting width 90°/45° | 305 / 205 mm // 12 / 8 1/16 ” mm |
| Maximum cutting depth at 90°/45° | 92 / 47 mm // 3 5/8 / 1 13/16 ” mm |
| Cutting capacity 90°/90° | 305 x 92 mm / 12 x 3 5/8 ” mm |
| Cutting capacity 45°/45° | 205 x 47 mm / 8 1/16 x 1 27/32 ” mm |
| Turntable setting left/right | 47 / 47 ° |
| Saw blade tilt left/right | 47 / 2 ° |
| Saw blade | 254 x 30 mm / 10 x 1.181 ” mm |
| Rated input power S1 100% | 1450 W |
| Rated input power S6 20% | 1800 W |
| No-load speed | 4500 /min |
| Revolutions at rated load | 3150 /min |
| Power input | 550 watt |
| Air pressure | 55 mbar |
| Air volume flow | 3.8 m3 / min. |
| No-load speed | 16,000 rpm |
| Weight | 1.7 Kg. |
| Power input | 350 watt |
| Sanding disc diameter | 150 mm (6″) |
| Orbital stroke rate | 8,500 /min. |
| No-load speed | 4,200 – 11,000 rpm |
| Sanding sheet / disc attachment | Velcro-type fastening |
| Weight | 2.4 Kg. |
| Power Source | Manual |
| Main Broom Length | 480mm |
| Hopper Vol. | 38L |
| Weight | 20 kg |
| Power Input | 2.2 kW |
| Pump Pressure (Max.) | 11 Mpa |
| Water Flow (Max.) | 660 l/h |
| Max outlet Temp | 80⁰C |
| Weight | 110 Kg |
| Power Input | 5.5 kw |
| Power Supply | 440 volt |
| Pump Pressure (max.) | 200 bar/2900psi |
| Water Flow (max.) | 16.5 lt./m |
| Weight | 56 kg |
| Power Input | 2.9 kw |
| Pump Pressure (Max.) | 140 bar/14MPa |
| Water Flow (Max.) | 620 lt./h |
| Max. Inlet Temperature | 60oC |
| Weight | 39 kg |
| Power Input | 2.3 kw |
| Pump Pressure (Max.) | 120 bar/12MPa |
| Water Flow (Max.) | 520 lt./h |
| Max. Inlet Temperature | 60oC |
| Weight | 27 kg |
| Power Input | 1.4 kw |
| Pump Pressure (Max.) | 110 bar/11MPa |
| Water Flow (Max.) | 440 lt./h |
| Max. Inlet Temperature | 40oC |
| Weight | 6 kg |